WRAP SEAL QUICK REPAIR KIT FOR PIPE LEAKS FEATURES
Repairs leak in 30 minutes
Applicable to pipes up to 18″ (457 mm) diameter
Applicable on any metal or non-metal pipes
Repairs T-joint, elbow joint, valve thread, valve body
Withstand pressure up to 400 psi (28 kg/cm2)
Withstand temperature up to 200 °C (392 °F)
Safe for drinking water and resistant to most chemicals
Reinforce and strengthen pipe after repair
Permanent repair and extend service life of pipes
APPLICABLE MATERIAL
Steel
Copper
Aluminium
Galvanized steel
PVC
CPVC
Stainless steel
Polyethylene
Polypropylene
Cast-iron
Concrete
FRP/GRE
CHEMICAL RESISTANCE
Oil
Water (drinking water, wastewater, steam)
Solvents (acetone, toluene, MEK, ethyl alcohol)
Mild acids (hydrochloric acid, sulfuric acid) and alkalis
Chemical (ethylene glycol, xylenes, ammonia)
Hydrocarbons
Bases
Slurries
Fuels (petroleum, diesels, gasoline)
Gases (LNG, LPG)
Organic salts
WORKING TIME (FIBERGLASS TAPE)
1 minute at 30 °C (86 °F)
CURING TIME
30 minutes at 30 °C (86 °F)
Heat may be applied to decrease curing time
Unopened foil pouch may be immerse in cold water prior to repair to add working and curing time.
APPLICATION
Pipe repairs
Offline repairs
Sealing joints
Hazardous material spill control
Reinforce thinning walls
Abrasion protection
Structural reinforcement
Repairs in hard to reach areas
Underwater repairs
OPERATING TEMPERATURE
Continuous – From -29 °C (-20 °F) up to 200 °C (392 °F)
Intermittent – From 200 °C (392 °F) up to 320 °C (570 °F)
OPERATING PRESSURE
Recommended for pressure up to 400 psi (28 kg/cm2)
Results vary depending on pipe size, type of pipe, hole size, pipe content and method of application
APPLICABLE INDUSTRIES
TECHNICAL DATA
WRAP SEAL OFFLINE LEAK REPAIR PROCEDURE
